Micro Blown CLT Cable
Optical fibres are placed in a high modulus loose tube. Tube filling compound is filled in the central tube to protect fibres. In addition, a layer of aramid yarn is surrounding the unitube as the strength member. Micro blown centre loose tube cable enables to cut ducts anywhere and any time for distribution, and without influence on other cable in the same time. As results, it saves lots of costs on construction and splicing joints. To sum up, this cable is usually used in air blowing constructions in access network.
Application
This cable can be used as the drop cable of distribution segments in FTTH networks and can be laid by air blowing to connect the branch point with the access point for subscribers.
This cable is also applicable in backbone networks, metropolitan area networks and access networks.
Product Benefits
Connects distribution branch and end user’s access point.
Allowing to blow out and replace with new cables to keep technical superiority.
Small diameter and light weight provides good air blowing performance.
Save costs in construction and splicing equipment.
Blowing by phases laying method reduces initial investment costs.
Technical Specifications
Fibre mode: Single-mode or multimode.
Fibre count: Typically 2 to 24 fibres.
Fibre type: G657A1 and different types upon request.
Diameter: Typically between 2-3mm.
Temperature range: -20°C to +70°C.
- Name
- Tube
- Fibre Per Tube
- Data Sheet
- 2F Micro Blown CLT
- 1
- 2
- Download Sheet
- 12F Micro Blown CLT
- 1
- 12
- Download Sheet
- 24F Micro Blown CLT
- 1
- 24
- Download Sheet
- Name
- Tube
- Data Sheet
- 2F Micro Blown CLT
- 1
- Download Sheet
- 12F Micro Blown CLT
- 1
- Download Sheet
- 24F Micro Blown CLT
- 1
- Download Sheet
Find on
